Table of Contents
Advertisement
[ESC+$=] Outline Font Print
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying printing command of outline font.
[Format]
<$=>n...n
-
Parameter
n [Print data] = Data
[Coding Example]
Print data: SATO
<A>
<V>100<H>100<P>2
<$>A,100,100,1<$=>SATO
<Q>2
<Z>
[Supplementary Explanation]
-
The outline font printing command <$=> shall be executed after the outline font design <$>.
-
Font height includes both ascender and descender area. For proportional pitch, the character
width of outline font differs depending on the font to be used.
-
Use character pitch command <P> to specify font pitch.
-
Italic characters are tilt in an angle of 15-degree, within their specified width. Font height
includes both ascender and descender area.
-
For the font design 1 through 9, if the specified dot setting is irregularly small, the font cannot be
identified.
-
If the font width / height are very small, there can be cases that the font is squeezed.
-
JIS, Shift JIS, or Unicode (UTF-16, UTF-8) can be used for Kanji outline font, which should
correspond with this product settings to proper printing. Specify Kanji code by <KC> command
or "Settings Mode" of this product.
[Valid Commands]
Print position
<V>
Modification
<P>
Calendar
<WA>
ESC
<1B>
16
None
When the power is OFF
Valid range within items
Valid range between items
<H>
<%>
<$>
<F>
$=
<24>
<3D>
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
102
Parameter
n...n
Advertisement
Table of Contents
