Table of Contents
Advertisement
[ESC+~A] Cut Number Unit
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the number of labels for each cut.
[Format]
<~A>aaaa
-
Parameter
a [Number of labels between each cut] = Valid range : 0 to 9999
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XS>ABC
<~A>2
<Q>7
<Z>
2 pcs
[Supplementary Explanation]
-
Valid only for Cutter models.
-
If the parameter is not specified by this command <~A>, each label will be cut after being
printed.
-
In case the parameter "a" is set to 0, no label will be cut.
-
Set this command before Print Quantity <Q>.
-
This command may not be used in combination with other cut commands <~>.
ESC
<1B>
16
aaaa=1
When the power is OFF
Valid range within items
Valid range between items
Cut
Cut
7 pcs
Feed direction
~A
<7E>
<41>
16
16
The set parameter is not maintained.
The set parameter is valid until the next specification is
made.
The set parameter becomes initial value at the next item
<A>.
1 label left
Cut
Cut
311
Parameter
aaaa
Advertisement
Table of Contents
