Table of Contents
Advertisement
Cleaning the FusionPunch II
Your FusionPunch II is designed as a high-speed, inline production Punch
that requires only a minimal amount of attention from the operator. But,
because it is a production machine and because it handles and punches
paper, we recommend a light cleaning of the paper path components
periodically, to remove accumulations of paper dust, paper chips and toner.
GBC recommends the following operator maintenance practices.
When to Clean
The following is based on a printing house that operates one to three shifts a
day.
Heavy usage (continuous - 8 hours per shift)
Medium Usage (intermittent - 4 hours per shift)
Light usage (intermittent - 2 to 3 hours per shift)
In effect, the FusionPunch II should be cleaned after every 8 continuous
hours of operation.
Note: In a very busy shop with significant paper dust in the air, the
FusionPunch II may have to be cleaned more frequently - for example, after
every 6 continuous hours of operation.
Cleaning the FusionPunch II
Usage
Cleaning Intervals
after each shift
after every 2 shifts
after every 3 shifts
4-3
4
Advertisement
Table of Contents
