Error Messages From The Fusionpunch Ii - GBC 16 Series User Manual

Error Messages
From the FusionPunch II
The following is a listing of Punch-related error messages that could appear
on the FusionPunch II Control Panel Display screen. Also included are a
description of the possible causes and the resolution for each problem.
Error Message
Punch Covers Open
Punch Left Door open/
Punch Mid Door open/
Punch Right Door
open
Stacker Cover open
Stacker Door open
Error Messages
Possible Cause
The Interlock Switch
under one or both of
the Punch covers is not
actuated.
The Interlock Switch
behind the Punch Door
that corresponds to the
error message is not
actuated.
The Interlock Switch
under the Stacker's
Top Cover is not
actuated.
The Interlock Switch
behind the Stacker
Door is not actuated.
Figure 3-4: Punch-Generated Error Messages
Resolution
Open and close both Punch
covers and ensure that they
are securely closed. If the
problem persists, call your
GBC or Xerox Service
Representative.
Open and close the
appropriate door,
corresponding to the error
message, and ensure that it is
securely closed. If the
problem persists, call your
GBC or Xerox Service
Representative.
Open and close the Stacker's
Top Cover and ensure that it
is securely closed. If the
problem persists, call your
GBC or Xerox Service
Representative.
Open and close the Stacker
Door and ensure that it is
securely closed. If the
problem persists, call your
GBC or Xerox Service
Representative.
3
3-7