Overall Machine Information; Specifications; Main Body - Ricoh IS450S Service Manual

22 December 1998

1. OVERALL MACHINE INFORMATION

1.1 SPECIFICATIONS

1.1.1 MAIN BODY

Scanning method:
Book scan:
ADF:
Scanning resolution:
Grayscales:
Initialization time:
Scanning speed:
Scanning throughput:
Interface:
Power:
Power consumption
(without all possible options):
Flat-bed with ADF
Horizontal: Max. 298 mm [11.7"]
Vertical: Max. 432 mm [17.0"]
Document size:
Width: 69 ~ 298 mm [2.7" ~ 11.7"]
Length: 120 ~ 2,000 mm [4.7" ~ 78.5"]
All pages in a document must be the
same width
Document weight: 41 ~ 128 g/m
ADF capacity:
150 sheets (64 g/m
110 sheets (105 g/m
80 sheets (105 g/m
Stack height must be less than 15 mm [0.6"]
Simplex mode:
Main scan: 100 ~ 800 dpi (in 1 dpi steps)
Sub scan: 100 ~ 800 dpi (in 1 dpi steps)
Duplex mode:
Main scan: 100 ~ 600 dpi (in 100 dpi steps)
Sub scan: 100 ~ 600 dpi (in 100 dpi steps)
8 bits/pixel
About 15 seconds
0.65 s/200 dpi (A4, binary picture mode)
Simplex mode: 55 ppm/200 dpi
(A4, binary picture mode)
Duplex mode: 86 ipm/200 dpi
(A4, binary picture mode)
(Counted from the second page)
SCSI-2
1) 102 to 138 V ac (45 to 65 Hz)
2) 187 to 276 V ac (45 to 65 Hz)
Simplex model Standby:
Scanning: 90 W Max.
Low power mode: 12 W Max.
Duplex model Standby:
Scanning: 120 W Max.
Low power mode: 12 W Max.
1-1
SPECIFICATIONS
2
[11 ~ 34 lb.]
2
[20 lb.])
2
[24 lb.]/A4, A5, LT, HLT)
2
[24 lb.]/A3, DLT)
50 W Max.
80 W Max.