Wolf E Series Information Booklet page 42

Electronic control

Hide thumbs Also See for E Series:

Table of Contents

ELECTRIC COOKTOPS

DIAGNOSTIC MODE

Diagnostic mode allows the Service Technician to inspect the func-

tions of the cooktop controls. In diagnostic mode the last eight error

codes that have been recorded by the cooktop control can be

accessed. A total of 15 different modes can be accessed, once diag-

nostic mode has been initiated.

Initiating Different Modes

To initiate diagnostic mode, the unit needs to be in the "LOCK"

mode. Then, press and hold the "OFF" keypad for 5 seconds. The

cooktop controls will now enter into diagnostic Mode 1.

NOTE: If the "OFF" keypad is not released after 7 seconds, the diag-

nostic mode will be cancelled and the unit will return to the "OFF"

mode.

NOTE: If any other input signals are detected from the keypad, the

unit will not enter diagnostic mode.

NOTE: When in diagnostic mode all heating units are off.

NOTE: The unit will exit diagnostic mode if no inputs are detected

from the keypad in 20 seconds.

NOTE: If the "OFF" keypad is pressed again anywhere within the

diagnostic program, the unit returns to the "LOCK" mode of operation.

NOTE: There will be no audible signals during the diagnostic mode.

PAGE 42

Table of Contents

Wwd30 Df48 Df60