Fans And Motors - Wolf E Series Information Booklet

FANS AND MOTORS

First access Diagnostic Mode. Once in Diagnostic Mode, the techni-
cian can press a key to activate a fan or a motor. The fan and motor
relays will close to complete a 120 VAC circuit through a specific fan
or motor. If the Oven Controller detects the functionality through
switches, an indicator will be illuminated on the corresponding display.
NOTE: Diagnostic Mode will end 2 minutes after last key stroke or
when the CLEAR key is pressed.
Key Pressed
Roast
Convection Roast Oven Light
Self Clean
0
Bake
Convection Bake Outer Bake Element and
Relay(s) activated
Motor Door Lock (MDL)
Cool Fan Low
Cool Fan High
Inner Bake Element and
Right Convection Fan
Left Convection Fan
activated
Action
MDL switch in
open position
MDL in transition
MDL switch in
closed position
Light turns on
Fan Apparency
Switch activated
Fan Apparency
Switch not activated
Fan Apparency
Switch activated
Fan Apparency
Switch not activated
Right Convection
Fan activated,
Inner Bake Element
activated
Left Convection Fan Oven On Illuminated
Outer Bake Element
activated
PAGE 16
Display Response
Degree (°) Icon
Illuminated
Degree and
Centigrade Icon Off
Centigrade (°C)
Icon Illuminated
Not applicable
Fahrenheit °(F)
Icon Illuminated
Fahrenheit Icon Off
Fahrenheit Icon (°F)
Illuminated
Fahrenheit Icon Off
Oven On Illuminated