Xerox WorkCentre PE220 User Manual page 173

Condition
Pages print,
but are blank.
An error occurs
repeatedly
when you are
printing with
the USB
connection.
Xerox PE220
Possible cause
The print cartridge is
defective or out of toner.
The file may have blank
pages.
Some parts, such as the
controller or the board,
may be defective.
When the USB mode is
set to "Fast", some PC
user may experience
poor USB
communication.
Suggested solutions
Redistribute the toner, if necessary.
Redistributing Print Cartridge
See
Toner on page 8-6
.
If necessary, replace the print
cartridge.
Check the file to ensure that it does
not contain blank pages.
Contact a service representative.
Change the USB mode to "Slow". To
do so, follow these steps:
1. Press Menu until "Machine Setup"
appears on the display.
2. Press the scroll button ( or )
until "USB Mode" appears on the
bottom line and press Enter.
3. Press the scroll button ( or ) to
select "Slow".
4. Press Enter to save the selection.
5. Press Stop/Clear to return to
Standby Mode.
9 Troubleshooting
9-15