Making Copies; Loading Paper For Copying; Preparing A Document - Xerox WorkCentre PE220 User Manual

4 Copying

Making Copies

Loading Paper for Copying

Preparing a Document

4-2
The instructions for loading copy materials are the same whether you are
printing, faxing, or copying. For further details, see Loading Paper on page 2-6
NOTE:
For copying, you can only use Letter, A4, Legal, Folio, Executive, B5,
A5, or A6 sized print materials.
You can use the document glass or the Automatic Document Feeder (ADF) to
load an original document for copying, scanning, and sending a fax. Using the
ADF, you can load up to 30 documents (20 lb, 75 g/m
of course, place only one sheet at a time on the document glass.
When you use the ADF:
NOTE:
• Do not load documents smaller than 5.6 x 5.8 inches (142 x 148 mm) or
larger than 8.5 x 14 inches (216 x 356 mm).
• Do not attempt to feed the following types of documents:
– carbon-paper or carbon-backed paper
– coated paper
– onion skin or thin paper
– wrinkled or creased paper
– curled or rolled paper
– torn paper
• Remove all staples and paper clips before loading documents.
• Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading documents.
• Do not load documents that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents having
other unusual characteristics.
If you wish to copy any of the documents listed here, use the Document Glass.
2
) for one job. You can,
Xerox PE220