Xerox CX240 User Manual page 215

Setting Parameters in the Job Parameters Window
Print on back side:
Print on both sides:
cover
Finisher
The parameter enables you to select the destination of the printed
Finisher
output.
Note: The available stapling methods for PostScript files depend on the page
orientation and size. The stapling methods for PDF files depend on the page size.
Select an
Output Tray
(simple catch tray)
SCT
(offset catch tray)
OCT
•
The
Offset
to use an offset between sets, clear this check box.
Top Tray
•
The
Offset
to use an offset between sets, clear this check box.
•
To punch holes, select the
number of holes in the
Stacker
•
The
Offset
use an offset between sets, select this check box.
•
To use staples, select the
list, select the staple position.
•
To punch holes, select the
number of holes in the
Booklet Maker
•
To use staples, select the
list, select the staple position.
prints the last page of the job as the back cover
prints the last two pages of the job as the back
:
check box is selected by default. If you don't want
check box is selected by default. If you don't want
Puncher
list.
Type
check box is not selected by default. If you want to
check box, and in the
Stapler
Puncher
list.
Type
check box, and in the
Stapler
check box, and select the
Position
check box, and select the
Position
205