Table of Contents
Advertisement
Using Calibration Tables
Calibration List
The following options are available:
•
Click
to run the Color Calibration Wizard. This wizard
Calibrate
guides you in the use of the X-Rite DTP34 QuickCal densitometer to
create calibration tables, see Creating a Calibration Table on page 116.
•
Select a calibration table from the
delete the calibration table.
•
Click
to close the Calibration window.
Close
The Spire CX250 color server uses calibration tables to compensate for the
difference between the printer's performance and the required values.
The following calibration look up tables are provided:
•
Applies the factory default calibration table. Since this is
SpireNormal:
a default lookup table, it cannot be overwritten.
•
Applies the factory default saturated calibration table.
SpireSaturated:
This look up table applies a darker calibration table in comparison to
the
look up table. Since this look up table is a default table
SpireNormal
it cannot be overwritten.
•
Initially the
Normal:
look up table. This resemblance changes as soon as you
SpireNormal
calibrate your Spire CX250 color server, and at the end of the
calibration process choose to save your calibration table as default. As
a result, your calibration table is saved as the
•
Initially the
Saturated:
look up table. This resemblance changes as soon as you
SpireSaturated
calibrate your Spire CX250 color server, and at the end of the
calibration process choose to save your calibration table as default. As
a result, your calibration table is saved as the
•
Select
if you do not want to apply a calibration table to the job.
None
Calibration List
look up table is identical to the
Normal
look up table is identical to the
Saturated
123
and click
to
Delete
look up table.
Normal
look up table.
Saturated
Advertisement
Table of Contents
