Xerox CX240 User Manual page 127

Calibrating with the X-Rite DTP34 QuickCal Densitometer
Tip: Click the Densitometer Tutorial - Click & Learn icon to display an
animation of the measurement process and to learn how to use the X-Rite
DTP34 QuickCal densitometer correctly.
The first step in the wizard is
you to detect the point where you start to see toner on the paper.
In the list, select the required input tray.
3. Tray
The default tray setting is
wizard looks for a tray that contains
wizard does not find a tray with either of these sizes, an alert appears.
You can print calibration charts on any size paper. Ensure that the
required paper is in one of the trays, and then select that tray in the
wizard.
In the
4. Screening Method
Note: Make sure you set the screening method to the one you are going to
use to print the job.
In the
5. Media Type
setting is
Use Printer Settings
on the media type that is defined on the Xerox DocuColor 240/250
printer-copier.
Print Calibration Chart
. When this option is selected, the
Auto
Letter LEF
list, select the desired screening method.
list, select the desired paper stock type. The default
, which means that your job is printed
117
. This step enables
or paper. If the
A4 LEF