Xerox CX240 User Manual page 197

Setting Parameters in the Job Parameters Window
•
To emulate the original paper tint, select the
check box.
tint
Notes:
•
The Emulate source paper tint check box is available only if you
select Device Link as the emulation method.
•
When you select the Emulate source paper tint check box, the
Spire CX250 color server applies the absolute colorimetric rendering
method.
•
If the job is simplex, only the front side is printed using the tint
emulation.
•
Paper tint emulations are available only if you have the Pro
configuration.
•
Select
Emulate RGB elements
to the selected CMYK emulation method. The RGB elements
receive the same look as the CMYK elements, creating a consistent
appearance.
•
Select the
Preserve pure colors
magenta, yellow, and black during transformation.
In the
3. Rendering intent
Notes:
•
If you selected Device Link as the emulation method, Rendering
intent is unavailable because a rendering intent is already defined for
each device link emulation.
•
Custom CMYK Device Link emulations are available only if you have the
Pro configuration.
Spot Workflow
By default, the Spire CX250 color server looks in the spot color dictionary
for the correct value each time there is a spot color with a recognized name.
To ignore the spot color dictionary:
In the
Spot workflow options
check box.
dictionary
For more information about the Spire spot color dictionary, see Spot Color
Editor and Workflow on page 128.
to convert RGB elements according
check box to preserve pure cyan,
list, select the required option.
area, clear the
Use Spire spot color
187
Emulate source paper