Xerox CX240 User Manual page 202

192
Step & Repeat:
sheet so that the sheet is used to maximum capacity. This method is
used mainly for printing business cards.
Notes:
•
When you use the Step & Repeat template for VI jobs, the system
prints the job in Z-Sorting mode. This enables imposed VI jobs to be
sorted for cut-and-stack finishing.
•
It is possible to use specific step-and-repeat templates to print several
different images on one sheet.
•
This option is available only if you have the Pro configuration.
If you select
Step & Repeat
•
Cut & Stack:
stacked, and bound in the most efficient manner while
preserving the original sorting. A job's pages, booklets, or
books are sorted in a Z-shape. In other words, each stack of
pages is sorted in consecutive order. When stacks are piled one
on top of another, the entire job is already sorted up or down.
Note: If you select Cut & Stack, you cannot make changes or enter a
valid exception on the Exceptions tab.
prints pages ready for applying a book-finishing
Saddle Stitch:
technique in which the pages of a book are attached through
stitching or stapling in the spine fold—for example, brochures.
prints pages ready for applying a book-finishing
Perfect Bound:
technique in which the pages of a book are attached by trimming
the spine fold, roughening the edges of the gathered pages, and
gluing them together—for example, hardcover books.
Sizes
In the list, select the desired paper stock size. If you select
1. Paper size
, type the height in the
Custom
select or .
LEF SEF
In the
2. Media type
setting is
Use Printer Settings
is printed on the media type that is defined on the Xerox DocuColor
240/250 printer-copier.
prints multiple copies of the same image on one
, the following option is available:
enables
Step & Repeat
box and width in the
H
list, select the desired paper stock type. The default
. When this option is selected, your job
Appendix A– Setting Parameters
jobs to be printed, cut,
box, and then
W