Reference
Information
This section contains mounting information and instructions for downloading firmware.
Topics in this section include the following:
•
•
Print this
template
Mounting Template
at 100%
The following illustration is an example of a mounting template for preparing mounting
surfaces. It is not to full scale.
(10.87 cm)
Figure 26.
Please measure the printed template before cutting.
NOTE: Measure the template before cutting.
Mounting Template
Firmware Download
Template for the 1-gang
mounting bracket
2.45" (6.22 cm)
1.94" (4.93 cm)
4.28"
3.06"
(7.77 cm)
CUT-OUT AREA
FOR WALL MOUNT
Mounting Template for 1-Gang Mud Rings (Not to Full Scale)
XTP T HWP 101 4K Wallplate Transmitter • Reference Information
SURFACE
Recommended
cut-out area
for the installation
surface.
Top Panel
34