Reference Information; Specifications - Extron electronics PowerCage MTP AV Series User Manual

Reference
Information
This section provides the specifications and part numbers for the
PowerCage MTP T AV and Powercage MTP R AV modular boards.
•
•

Specifications

NOTE:
For PowerCage Enclosure specifications, refer to the PowerCage 1600 Enclosure User Guide,
or to the PowerCage system specifications, available online at www.extron.com.
Video — PowerCage MTP T AV, PowerCage MTP R AV
Gain ............................................... Unity
Differential phase error ................... <1.0° at 3.58 MHz and 4.43 MHz
Differential gain error ..................... <1.0% at 3.58 MHz and 4.43 MHz
Video input — PowerCage MTP T AV
Number/signal type ........................ 1 S-video or composite video
Connectors .................................... 2 female BNC
Nominal level ................................. 1 Vp-p for Y of S-video and for composite video, 0.3 Vp-p for C of S-video
Minimum/maximum levels .............. 0.3 V to 1.5 Vp-p with no offset
Impedance ..................................... 75 ohms
Return loss ..................................... <-30 dB, DC @ 10 MHz
DC offset (max. allowable) ............. 250 mV
Video output — PowerCage MTP R AV
Number/signal type ........................ 1 S-video or composite video
Connectors .................................... 2 female BNC
Nominal level ................................. 1 V p-p for Y of S-video and for composite video, 0.3 V p-p for C of S-video
Minimum/maximum levels .............. 0.3 V to 1.5 Vp-p
Impedance ..................................... 75 ohms
Return loss ..................................... <-35 dB @ 5 MHz
DC offset ....................................... ±20 mV with input at 0 offset
Sync — PowerCage MTP T AV, PowerCage MTP R AV
Standards ....................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio — PowerCage MTP T AV, PowerCage MTP R AV
Number/signal type ........................ 1 set of proprietary analog signals
Connector ...................................... 1 female RJ-45
Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ........................ 20 Hz to 20 kHz, ±1 dB
THD + Noise ................................... 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N ................................................. >70 dB at maximum output (unweighted)
Stereo channel separation .............. >60 dB @ 1 kHz
CMRR ............................................ >43 dB @ 20 Hz to 20 kHz
Specifications
Part Numbers
PowerCage MTP T AV and PowerCage MTP R AV • Reference Information 8