Service Hardware Mode - Bose FREESPACE 4400 Owner's Manual

5.0 Using FreeSpace

5.6 Service Hardware mode

The Service Hardware mode provides a list of any system errors
that have occurred.
To view the Error Log, click the Service Hardware button. If you
are already connected to hardware, the Error Log is retrieved
from the hardware and displayed in the window. If not yet con-
nected, select the hardware in the System Overview pane and
after establishing the connection, click
and then click
When the FreeSpace 4400 system is powered on, it performs a
self-test. Any errors detected during a power-on cycle are
appended to the Error Log. Likewise, any errors detected during
normal operation are appended to the Error Log. The Error Log
provides diagnostic information for repair technicians to help
them repair the system.
For more information on reported errors, see "FreeSpace
system Error Log" on page 55.
The buttons below the Error Log display allow you to manage the
Error Log information:
Uploads the current Error Log listing
from the hardware. If you recently
cleared the log, the Error Log will con-
tain information reported only since the
time you cleared it.
Exports the Error Log to your hard
drive as a text file.
Clears the Error Log from the window
and the FreeSpace 4400 system.
®
(Detect Hardware)
.
® 4400
4400 Installer™ Software
Hardware version
numbers
Type of alarm
Name of test
Test results
33 of 66
Service Hardware button
Error Log