4. Follow all instructions. 5. Do not use this apparatus near water or moisture. 6. Clean only with a dry cloth – and as directed by Bose. 7. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Microphone installation The wall plate-microphone assembly can be installed using a single-gang junction box, or the microphone can be removed from the wall plate and mounted directly on a flat surface. Single-gang junction box installation Surface-mounted mic Recommended wire length Up to 2000 feet (610 m) max., 24 AWG (0.2 mm ) shielded twisted pair (shield tied to minus at FreeSpace...
Page 6
Painting Before painting the wall plate, install the supplied temporary plug over the microphone opening. Remove the plug when finished.
System wiring Installer’s Note: Disconnect the FreeSpace ® 4400 system from the AC (mains) power before making any input/output connections. Connect each sensing microphone to the SENSE MICROPHONES jacks on the FreeSpace 4400 rear panel.
Auto Volume zones. Avoid placing the microphone near unique noise sources like HVAC equip- ment, dishwashers, motors, etc. Note: See “Designing with the FreeSpace 4400 System" in the FreeSpace 4400 Business Music System Owner's Guide for more details on sensing microphone placement.
What we will do: the control of Bose or products purchased for We will repair or replace in our sole discretion ® an unauthorized reseller. Bose...
Page 11
How you can obtain Limited Warranty WITH YOUR PERSONAL RECORDS ALONG service: WITH PROOF OF PURCHASE. THIS INFOR- You can ship the system to either a Bose MATION WILL ALLOW US TO BETTER SERVE Service Agency or to Bose directly with a proof YOUR NEEDS.