Manual Regeneration - Culligan Gold Arsenic Series Owner's Manual

There are several conditions that will cause the control to trip a regeneration. The screen displays RE-
GEN TONITE when the control has signaled for a regeneration. REGENERATING is displayed while the
control is in regeneration. The following are conditions that will call for regeneration:
1. When the Soft-Minder
2. At the preset time, when the number of days without a regeneration is equal to the regeneration
interval (timeclock backup) setting.
3. At the preset time, when REGEN TONITE is selected. The screen displays REGEN TONITE.
4. Immediately, when the REGEN NOW is selected. The screen displays REGENERATING.
5. Immediately, if power to the unit has been off for more than three (3) hours and time of day has
been restored.
6. At the preset time based on DAY-OF-WEEK Regeneration setting.
Follow either procedure to initiate a manual regeneration.
Delayed Regeneration
Screen Display
FILTERING
JAN-01-13 12:01P
REGEN TONITE
JAN-01-13 12:01P
REGEN OFF
JAN-01-13 12:01P
Immediate Regeneration
Screen Display
FILTERING
JAN-01-13 12:01P
REGEN NOW
JAN-01-13 12:01P
REGENERATING
JAN-01-13 12:01P
meter has recorded the passage of a predetermined number of gallons.
®
Range
1. At the HOME SCREEN, press
N/A
three seconds, then release the button.
The first line of the display will toggle between FILTERING
2.
Regen
and REGEN TONITE.
Tonite
3. To cancel a delayed regeneration, press and hold the
Regen
for three (3) seconds, then release the button. The screen
Off
displays REGEN OFF.
Range
1. At the HOME SCREEN, press
N/A
(10) seconds, then release the button.
The first line of the screen displays REGEN NOW. The fil-
2.
Regen
ter will initiate an immediate regeneration.
Now
N/A
3. The first line of the screen displays REGENERATING.
Changing the Setting
and hold for at least
Changing the Setting
and hold for at least ten
Manual
Regeneration
01021568
12