Culligan Gold Arsenic Series Owner's Manual page 10

01021568
7
Total Capacity
TOTAL CAPACITY
743
GALLONS
K-Factor
FLOW METER
80.00
PULS/GAL
Completed First Time Setup
Initializing
JAN-01-13 12:01P
FILTERING
JAN-01-13 12:01P
The controller is designed to simplify the setup and installation process by making some default recom-
mendations during the Initial Setup. The default settings are designed to be appropriate for most common
installations.
The screen displays the total capacity setting (10–999999) for the filter,
which specifies how often the filter will initiate reconditioning based on
total flow, in gallons. When the total flow reaches total capacity, the filter
initiates reconditioning at the preset time.
NOTE Culligan recommends using REGEN INTERVAL
(Time Clock Backup) even if a meter is used to
inititate reconditioning.
Press or and then
vance to the next setting, K-FACTOR.
The screen displays the K-factor for the flow meter setting. Press
keep the default setting and to complete the first time setup.
When the setup is complete, the circuit board microprocessor automati-
cally calculates filter capacity. The screen displays the initializing status
and the current date and time, and then transitions to the home screen.
The screen displays the current state (the display alternates between Filter-
ing and any error) and the date/time set for the unit. This is the default
home screen.
to change the setting. Press to ad-
to