Common Macintosh Problems - Xerox WorkCentre 3119 User Manual

Common macintosh problems

Problems in printer setup utility
Condition
There is described • Software is not installed correctly. Reinstall the
"driver not software. See Software Section.
installed" at Product
• Make sure that you are using a high-quality cable.
List Window after
you click Add and
Select USB.
Your product not • Make sure that the cables are connected correctly
listed at Product
and the machine is turned on.
List Window after
• Check if "Ready" appears on the display of the
you click Add and
control panel. If not, clear the problem depending
Select USB.
on the error message; see "Understanding display
messages" on page 9.4.
• Make sure that the correct printer driver has been
selected at Product List Window after you click Add
and Select USB.
Suggested solutions
9.12
Troubleshooting