Ricoh Ri 100 Manual page 168

Web Image Monitor –
Static IPv4 Setup -
Connecting via
Ethernet
1. Open the port cover
2. Plug the Ethernet cable into
the Port
3. Connect the other end of the
cable to the printer's
network, such as to a hub.
Check the LEDs on the
Ethernet port
1. Indicator (green): Lights
whenever the printer is
properly connected to the
network
2. Indicator (yellow): Lights
whenever the printer is
sending or receiving data via
the network
Web Image Monitor –
Static IPv4 –
Connecting Ethernet
1
2
1
3
2