Ricoh Ri 100 Manual page 13

Connecting printer via
Ethernet
1. Open the port cover
2. Plug the Ethernet cable into the
Port
3. Connect the other end of the
cable to the printer's network,
such as to a hub. Check the LEDs
on the Ethernet port
1. Indicator (green): Lights
whenever the printer is properly
connected to the network
2. Indicator (yellow): Lights
whenever the printer is sending
or receiving data via the network
4. Close port cover
*If Static IP Address, click link for
details
Connecting
Ethernet -
Ethernet Connection
1
1 2
2
3 4