Date And Time Setup - Night Owl IC8 Series User Manual

6.1.3 Date and Time Setup

The Date and Time Setup screen of the Startup Wizard will allow you to set the current date and time. You
may choose to use Network Time Protocol (NTP) to auto-configure the current date and time. To use NTP,
check the Enable box next to Sync Time, then click Sync Now.
NOTE: In order to use Network Time Protocol (NTP), your NVR must be connected to the Internet. Selecting Sync Now
will temporarily stop recording while syncing NTP.
By clicking the "Advance" tab on the Sync Time line, you can edit the Sync Time Server as well as schedule
Auto Sync Time to prompt your NVR to automatically sync NTP.
27