Nvr Diagram - Night Owl IC8 Series User Manual

3.2.1 NVR Diagram

QR Code
NOTE: The maximum number of cameras you can connect to your NVR will be determined by the number of channels.
Video Inputs – Allows for the connection of IP cameras.
1
Power Input – Used to connect the included 12V DC power supply.
2
Audio Output – Allows for the connection of an amplified speaker using a TRS 3.5mm / 1/8 inch
3
commonly known as a phone/headphone jack.
VGA Output – Allows for a video connection. If the TV/Monitor does not have an HDMI input but does
4
have a VGA input, connect the VGA cable from the VGA output port on the NVR to the VGA input port
on your TV/Monitor. (VGA cable not included)
HDMI Output – Allows for a video connection. If the TV/Monitor has an HDMI input, connect the HDMI
5
cable from the HDMI output port on the NVR to the HDMI input port on your TV/Monitor.
RJ-45 (Ethernet) Port – Used to connect the NVR to your router/modem via the included Ethernet cable.
6
USB Ports – Allow for the connection of a USB mouse and/or a USB flash drive. Connect the
7
included USB mouse to assist you in navigating the NVR's menu interface. You can use a USB flash
drive to download video files from the NVR for long term storage or sharing.
FRONT VIEW
1
REAR VIEW
2 3 4 5
12
6 7