Communicating Network Space Sensors - Daikin Rebel Applied DPSA Installation And Start-Up Manual

Communicating Network Space Sensors

The MicroTech 4 unit controller can be connected to a Network
of the 3 space sensors as either a temperature sensor only
or a temeprature, Humidity and CO
Sensor comes with a backlit LCD screen to show current
space conditions, allow setpoint adjustment and commupance
commands.
• Network Temperature Sensor – Part Number 910279216
• Network Combo Temeprature Sensor – Part Number
910278050
Figure 58: Network Space Sensor
The MicroTech 4 can support up to 3 Network (QMX) sensors
wired to the Process Bus terminals with a Daisy Chain Twisted
pair. Refer to OM 1288 for MicroTech 4 configuration and set-
up instructions
NOTE: The sensor is available in english units only and does
not show SI units.
www.DaikinApplied.com
combo sensor. Each
2
53
Figure 59: QMX Sensor
Refer to OM 1288 for MicroTech 4 configuration and
Refer to OM-1288 for MT4 configuration and set-up instructions
set-up instruction
Note: The sensor is available in english units only and does not show SI units.
NOTE: The sensor is available in English units and does
not show SI units.
IM 1287 • REBEL APPLIED ROOFTOP
Unit Operation