Free Input Of The Seam Pattern (Teach In) - Pfaff 3371-10 series Instruction Manual

Input
11

Free input of the seam pattern (Teach in)

.04
In addition to the selection of firmly stored seam patterns (see Chapter 11.06 Summary of
the seam patterns), there is also a possibility of setting seam patterns (button type) as
desired using the corresponding parameter input.
No
201
50
No
202
11 - 4
The program numbers P50 to P99 are reserved for the free input of seam
patterns.
Switch on the machine.
After the machine has been switched on, it is in the input mode.
P1 P2 P3 P4 P5
TE
No
001
With the corresponding plus/minus keys, select the parameter 201 to enter the program
number.
P4 P5
P1 P2 P3
TE
No
201
With the corresponding plus/minus keys, select the desired program number.
With the corresponding plus/minus keys, select the parameter 202 to enter the button
type.
With the corresponding plus/minus keys, select the desired button type.
(2 = two-hole button, 3 = three-hole button, 4 = four-hole button)
With the corresponding plus/minus keys, select the parameters 203 – 208 in turn to
enter the coordinates of the buttonholes 1 – 6, and enter the relevant values for the X-
and Y-direction.
If necessary, with the corresponding plus/minus keys, select the parameter 209 to enter
the number of stitch positions and enter the desired value.
If necessary, with the corresponding plus/minus keys, select the parameter 210 to
choose the stitch formation.
The stitch formation can only be chosen for three- and four-hole buttons and depends on
the previously selected button type.
P7
P6 P8
P
C1
VAL
2500 C2
C3
TE
P7
P6 P8
P
C1
VAL
50
C2
C3
TE