Avaya J100 Series Installing And Administering page 334

Customizable parameters
Parameter name
DHCPSTD
DIALPLAN
DIALING_MODE_DEFAULT
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
0
Null
1
environment
Description
Specifies whether DHCP
complies with the IETF
RFC 2131 standard and
continues to use the
expired DHCP lease.
Value operation:
• 0: Continue using the
address in an extended
rebinding state.
• 1: Immediately stop
using the address.
Specifies the dial plan
used in the phone.
Dialplan accelerates
dialing by eliminating the
need to wait for the
INTER_DIGIT_TIMEOUT
timer to expire.
The value can contain 0 to
1,023 characters. The
default value is null.
Specifies the dialing
mode. If this parameter is
set to "Automatic" or
"Manual", then it specifies
default dialing mode. If this
parameter is set to forced,
then the option to pick
dialing mode disappears
from Phone UI user menu.
Table continues...
334