Avaya J100 Series Installing And Administering page 403

Parameter name
PHONEKEY
PHONE_LOCK_IDLETIME
PHONE_LOCK_PASSWORD_FAILED_ATTEMPTS
PHONE_LOCK_PASSWORD_LOCKED_TIME
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
Null
0
8
5
environment
List of configuration parameters
Description
Specifies the list of pre-
configured keys.
For the PHONEKEY
syntax rules and values,
refer to Pre-configuration
of keys parameter on
page 240 and
PHONEKEY parameter
values on page 489.
Specifies the interval of
idle time, in minutes, after
which the phone will
automatically lock.
Value operation:
• 0: Phone will not lock
automatically.
Valid values are 0 through
10,080.
Specifies the number of
consecutive failed
attempts that you permit to
unlock the phone. After
the maximum is reached,
the user will be blocked
from further attempts for a
period of time before being
allowed to attempt again.
If you set the value to 0,
the user will never be
blocked from attempting to
unlock the phone.
Specifies the length of
time that you set where
the user will be blocked
from attempting to unlock
the phone if the user
exceeds the maximum
number of failed unlock
attempts.
The value ranges between
5–1440 minutes.
Table continues...
403