Avaya J100 Series Installing And Administering page 69

Parameter name
L2Q
VLANTEST
April 2020
Default value
0
60
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Description
Specifies if layer 2 frames
generated by the telephone have
IEEE 802.1Q VLAN tags.
Value operation:
• 0: Auto. VLAN tagging is turned
on when the network can
support VLAN tagging and
L2QVLAN is non zero.
• 1: On. VLAN tagging is turned
on when the network can
support VLAN tagging. The IP
phone sends tagged frames
with VLAN = L2QVLAN, even if
L2QVLAN is set to 0.
• 2: Off. VLAN functionality is
disabled.
L2Q is configured through:
• Local admin procedure
• A name equal to value pair in
DHCPACK message
• SET command in a settings file
• DHCP option 43
• LLDP
Specifies the number of seconds
that the phone waits prior to
failing back to a different VLAN ID
if no response is received from
the DHCP server.
Valid values are 0 through 999.
Value operation:
• 0: The phone continues to
attempt a DHCP REQUEST
forever.
VLANTEST is configured through:
• Settings file
• A name equal to value pair in
DHCPACK message
environment
Virtual LAN (VLAN)
Table continues...
69