Function Setting; Filter Sign; Room Temperature Control For Indoor Unit Sensor - Fujitsu ASTG18KMTC Service Instruction

3-1. FUNCTION SETTING

3-1-1 INDOOR UNIT
Follow the instructions in the Local Setup Procedure, which is supplied with the remote control,
in accordance with the installed condition.
After the power is turned on, perform the Function Setting on the remote control.
The settings may be selected between the following two: Function Number or Setting Value.
Settings will not be changed if invalid numbers or setting values are selected.

1-1. Filter Sign

Select appropriate intervals for displaying the fi lter sign on the indoor unit according to the
estimated amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Setting Description
Standard (400 hours)
Long interval (1000 hours)
Short interval ( 200 hours)
No indication

1-2. Room temperature control for indoor unit sensor

Depending on the installed environment, correction the room temperature sensor may be required.
Select the appropriate control setting according to the installed environment.
The temperature correction values show the difference from the Standard setting "00"
(manufacturer's recommended value).
Setting Description
Standard setting
No correcion 00°C
More
Cooling
Less
Heating
Less
Cooling
More
Heating
(
Function Number
11
Function Number
-0.5°C
-1.0°C
-1.5°C
-2.0°C
-2.5°C
-3.0°C
30
-3.5°C
(For
-4.0°C
cooling)
+0.5°C
+1.0°C
+1.5°C
+2.0°C
+2.5°C
+3.0°C
+3.5°C
+4.0°C
03-01
Factory setting)
Setting Value
00
01
02
03
( Factory setting)
Setting Value
00
01
02
03
04
05
06
07
31
08
(For
09
heating)
10
11
12
13
14
15
16
17