Louver Control; Vertical Louver Control; Horizontal Louver Control; Swing Operation - Fujitsu ASTG18KMTC Service Instruction

7. LOUVER CONTROL

1. VERTICAL LOUVER CONTROL

(Function Range)
Each time the button is pressed, the air direction range will change as follow:
Types of Air flow Direction Setting:
ALL MODE :
The Remote Controller's display does not change.
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry mode
Heating mode
During AUTO mode operation, for the first a few minutes after beginning operation,
air-flow will be horizontal
The air flow direction setting will temporarily become
low at the start of the Heating mode.

2. HORIZONTAL LOUVER CONTROL

(Function Range)
Each time the button is pressed, the air direction range will change as follows.

3. SWING OPERATION

To select Vertical Airflow Swing Operation
When the swing signal is received from the remote controller, the vertical louver starts to swing.
(Table9 -1 : Swinging Range)
Cooling / Dry mode
Fan mode (
The SWING operation may stop temporarily when the air conditioner's fan is not operating,
or when operating at very low speeds.
To select Horizontal Airflow Swing Operation
When the swing signal is received from the remote controller, the horizontal louver starts to swing.
(Table 9 -2 : Swinging Range)
Cooling/ Dry/ Heating/ Fan mode
The SWING operation may stop temporarily when the air conditioner's fan is not operating,
or when operating at very low speeds.
Horizontal flow
Downward flow
; the air direction cannot be adjusted during this period.
)
when the temperature of the air -flow is
Range
Range
01-08
Fig.8 -1 : Air Direction Range
1
2
3
4
5
6
Fig.8 -2 : Air Direction Range
1
4
2
3
5