Paring Method; Manual Mode - Fujitsu ASTG18KMTC Service Instruction

Air conditioner registration

Paring Method

Choose from the following modes to connect your Air conditioner to your Wireless LAN router .
Note:
Before starting this setting, wait for 60 seconds or more after the power supply is conne cted to the air conditioner (via breaker or plug). Confirm that the LED 1 is not flashing.

Check that the smartphone or tablet PC is linked to the wireless router you are conne cting the air conditioner.

The setting will not work if it is not connected to the same wireless rou t er.
To control 2 or more air conditioners with the same smartphone or tablet PC, repeat the setup of the chosen mode.

The display contents are subject to change as a result of updates in the mobile app, and may not match the actual screen.

■ Manual mode (For Android OS)
*Lighting pattern:
NOTES: If you do not press any buttons of the remote controller for 60 secon ds, the remote controller display will
return to the original display.
1
Press on the remote controller until only the
clock is displayed on the remote controller display.
2
Launch the mobile app.
3
Sign in with your Email address and password fol-
lowing the screen on the mobile app.
4
Press [+] to add a new air conditioner.
5
Press down
than 5 seconds.
will be displayed on the remote controller dis-
play.
6
Press .
7
Select using
8
Press .
on the indoor unit will blink.
On
Blinking
on the remote controller for more
.
Any state
02-45
(E mail Address)
(Pass word)
Sign In
+
(Remote controller
display)
(Remote controller
display)
(Continued)