21.12.3.
Layout file manager
The "Layout file manager" screen opens by clicking the [3D view] tab -> [Layout file] group -> [Layout file
manager] button on the ribbon.
In the "Layout file manager" screen, you can add, delete, rename and perform other operations on layout files.
(3) Add
No.
Item
(1)
Title name
(2)
3D display of layout
files
(3)
Add
(4)
Delete
(5)
Change name
(6)
Load
21-576
(1) Title name
(4) Delete
(5) Change
Figure 21-102 Layout File Manager Screen
This displays all of the layout file names registered to the current workspace.
This displays the layout objects of the files currently selected in the layout file
list so that you can check the file content.
This adds a new or existing layout file to the current workspace.
Clicking the [Add] button displays the screen for selecting [New] or [Existing].
By [New], you can create a layout file with a new name.
By [Existing], you can select an existing layout file, such as a layout file in
another workspace, and add this to the current workspace.
This deletes the layout file selected in the layout file list.
Since the entire folder is deleted when a layout file is deleted, 3D models and
MXT files also will be deleted if they are in the same folder.
This renames the layout file selected in the layout file list.
This loads the layout file selected in the layout file list in the 3D monitor.
Note that the current layout information will be deleted.
name
Description
(2) 3D display of
layout files
(6) Load
21-576