Toshiba V Series Manual page 8

4. Precautions During Parts Replacement
WARNING
Mandatory
Turn off power of the equipment before
replacing the power fuse or warning fuse.
Otherwise, it can cause electrical shock or fire.
5. Precautions During Daily Use
WARNING
Mandatory
Apply power of the specified ratings (voltage
fluctuation range, frequency, output rating,
etc.) in User's manual.
Otherwise, it can cause malfunction, machine
damage or fire due to overheat.
vi
CAUTION
Mandatory
1. A parameter setting request (from a slave
device) sets slave device parameters in the
non-volatile memory of the DN311. Unless
the slave device configuration is changed, it
is not necessary to execute this request
each time power is switched on.
If the requested slave device parameters
are identical with those in the non-volatile
memory, no parameter setting processing
will take place.
2. To change the slave device configuration,
delete the slave device parameters in the
non-volatile memory, and set new slave
device parameters.
3. Slave device parameters can be set in the
non-volatile memory of the DN311 up to 300
times.
Mandatory
Turn off power immediately if the ambient
temperature or internal temperature exceeds
beyond normal range or if failure is occurred
in the equipment.
Contact Toshiba for repairing.
Operation under such situation can cause fire
or electrical shock.
model 3000 DeviceNet Module Manual (DN311/DN311A)