Replace Electric Motor - Graco Reactor 2 H-30 Repair Parts

Repair
Replace Electric Electric Motor
Replace Replace Electric
Remove
Remove Remove
NOTICE NOTICE NOTICE
Be careful not to drop or damage the motor. The
motor is heavy and may require two people to lift.
1. Follow Shutdown, page
2. Open electrical enclosure. Disconnect the
A side heater connector from the TCM. See
Electrical Schematics, page
electrical enclosure door.
3. Remove mounting bolts from the bottom frame
and move the system away from the wall.
Figure 2
4. Remove upper bolts (3). Tilt the electrical
enclosure down to gain access to the motor
cover.
56
Motor
Motor
48.
102. Close the
5. Remove motor and belt covers (123, 131, 132).
Lift cover (132) and loosen the blue bracket (131)
fasteners. Lift the blue bracket (133) off of the
fasteners and set aside. Remove the belt covers
(131, 132).
Figure 3 Motor and Belt Covers
Figure 4 Heater and Belt Covers
334946H