Video Input/Output Settings; Setting The Output Format - Roland V-800HD MK II Owner's Manual

Video Input/Output Settings

Setting the Output Format

You set the output format to match the equipment you connect to the V-800HD MK II. You can output signals of different resolutions for the main
output (SDI OUT connectors and DVI-D/HDMI OUT connectors) and for analog output (RGB/COMPONENT OUT connector and SD OUT connector).
* The output format of the SD OUT connector is fixed at "480/576i" and cannot be changed.
Setting the Output Format
1.
Select the [MENU] button g "Output" g for Format, select
"Main," "RGB/Component," or "Composite."
2.
Use the [VALUE] knob to set the output format.
Main: SDI OUT connectors and DVI-D/HDMI OUT connectors
Value
480/576i (*1)
4:3
480/576i (*1)
16:9
720p 1080i 1080p
480/576p (*1)
4:3
480/576p (*1)
16:9
VGA SVGA XGA
WXGA SXGA FWXGA
SXGA+ UXGA WUXGA
(*1) At "480/576i" or "480/576p, " for the aspect ratio, select either "4:3" or "16:9. "
RGB/Component: RGB/COMPONENT OUT connector
Value
480/576p (*2)
4:3
480/576p (*2)
16:9
720p 1080p
VGA SVGA XGA
WXGA SXGA FWXGA
SXGA+ UXGA WUXGA
(*2) At "480/576p, " for the aspect ratio, select either "4:3" or "16:9. "
Composite: SD OUT connector
Value Explanation
480/576i
4:3
The output format is fixed at 480/576i and cannot be
changed. For the aspect ratio, select either "4:3" or "16:9. "
480/576i
16:9
3.
Press the [MENU] button to quit the menu.
Video signal that is output
SDI OUT DVI-D/HDMI OUT
SDI
DVI-D/HDMI
* No picture is
output.
Video signal that is output
Component
RGB
About Frame Rates
Frame rates which can be input and output are "59.94 Hz" and "50 Hz. "
Inputting video at a frame rate other than these might result in no
output or dropped frames.
To change the frame rate, press the [MENU] button g "System" g set
"Frame Rate" to "59.94 Hz" or "50 Hz. "
Operation of the OUTPUT FORMAT indicators
These indicators light up according to the output format setting
for main output (the SDI OUT connector and the DVI-D/HDMI OUT
connectors).
The correspondences between the indicators and output formats are
as follows.
SD 480/576i
HD
480/576p, 720p, 1080i, 1080p
RGB VGA, SVGA, XGA, WXGA, SXGA, FWXGA, SXGA+, UXGA, WUXGA
15