Siemens SIMATIC Manual page 446

Analog modules
6.12 Analog output module SM 332; AO 8 x 12 bit; (6ES7332-5HF00-0AB0)
Technical specifications
Interference frequency suppression, error limits
•
Crosstalk between outputs
Operational limit (across entire temperature range, relative to measurement range end value in the selected output range)
•
Voltage output
•
Current output
Basic error limit (operational limit at 25 °C, relative to the measurement range end value in the selected output range)
•
Output voltage
•
Output current
•
Temperature error (relative to output range)
•
Linearity error (relative to output range)
•
Repeat accuracy (in transient state at 25 °C, relative to output
range)
•
Output ripple; bandwidth 0 kHz to 50 kHz (relative to output
range)
Status, interrupts, diagnostics
Interrupts
•
Diagnostic interrupt
Diagnostic functions
•
Group error display
•
Reading diagnostics information
Actuator selection data
Output ranges (rated values)
•
Voltage
•
Current
Load impedance (in the rated output range)
•
For voltage outputs
– Capacitive load
•
For current outputs
– at CMV 1 V
<
– with inductive load
Voltage output
•
Short-circuit protection
•
Short-circuit current
446
> 40 dB
±0.5 %
± 0.6 %
± 0.4 %
± 0.5 %
± 0.002 %/K
+ 0.05 %
±0.05 %
±0.05 %
programmable
programmable
red LED (SF)
supported
± 10 V
0 V to 10 V
1 V to 5 V
± 20 mA
0 mA to 20 mA
4 mA to 20 mA
Min. 1 kΩ
Max. 1 µF
max. 500 Ω
max. 600 Ω
max. 10 mH
yes
max. 25 mA
Manual, 06/2017, A5E00105505-AJ
S7-300 Module data