Nautilus T618 Service Manual page 62

7. Using a #2 Phillips screwdriver, remove the indicated screw from both of the Rear
Roller Covers.
8. Remove the Rear Roller Covers.
To remove the Right Roller Cover, the Tilt Release Handle must be
pushed for additional clearance. Be sure not to pull down on the Deck
when the Tilt Release Handle is pushed or the Deck may begin to lower.
9. Using a #2 Phillips screwdriver, remove the 2 indicated screws from each of the
Deck Suspension Inserts.
62
Deck Suspension Inserts