Description Of Indicator - Huawei OptiXstar P812E Quick Start Manual

OptiXstar P812E
Quick Start
Table 4-1 Indicator status description 1
Indicator
Power
PON/LOS
POE1-
POE4/2.5GP
OE*
*The POE indicator only indicates the status of the network port and does not
indicate the power supply status of the PoE. The power supply status of the PoE
can be viewed through the device web interface or the network management
interface.
The status of PON and LOS reflects the connection between ONU and the optical
line terminal (OLT). The following table describes the status of the PON and LOS
LEDs.
Table 4-2 Indicator status description 2
Stat
us
No.
1
Issue 02 (2020-01-03)
4
Status
Steady
Off
See the following table.
Steady
Green blinking
Off
PON LOS Status
Status
Off Off
Copyright © Huawei Technologies Co., Ltd.

Description of Indicator

Description
Indicates that the power is on and working
properly.
Indicates that the power is off or faulty.
The Ethernet connection is in the normal state.
Data is being transmitted over the Ethernet
port.
The Ethernet connection is not set up.
Description
The ONT is prohibited by the upper-layer
device or blinks abnormally. Contact the
service provider for help.
4 Description of Indicator
13