Advertisement
OptiXstar P812E
Quick Start
How to log in to the web page?
Step 1 Configure the IP address of the PC to be in the same subnet as the LAN IP
address. For example:
●
●
Step 2 Enter the LAN IP address in the address bar of the Internet Explorer (IE), and then
press Enter to display the login page.
Step 3 On the login page, enter the user name and default password that referring to the
product nameplate. Then click Login and wait. After the password passes the
authentication, the web page is displayed.
●
●
●
----End
The LOS indicator blinks.
●
●
Issue 02 (2020-01-03)
IP address: 192.168.18.100
Subnet mask: 255.255.255.0
ONU factory default values of managed IP address and subnet mask:
● IP address: 192.168.18.1
● Subnet mask: 255.255.255.0
If no operations are performed within 5 minutes after logging in to the web
page, the system times out and the system automatically returns to the login
state.
Enter the wrong user name and password 3 times consecutively, the system
will be locked and automatically unlocked after one minute.
After logging in to the web page using the initial user name and password,
please change the password in time.
If the LOS indicator blinks once every 2 seconds, check whether the pigtail
fiber is properly connected and the connector is clean.
If the LOS indicator blinks twice a second, the ONU is prohibited by the
upper-layer device or blinks abnormally. Contact the service provider for help.
Copyright © Huawei Technologies Co., Ltd.
6 FAQs
6
FAQs
16
Hide quick links:
Advertisement
