Indicator Description - Huawei AP4050DN Hardware Installation And Maintenance Manual

AP4050DN-HD
Hardware Installation and Maintenance Guide
Figure 1-1 Appearance of the AP4050DN-HD
Table 1-1 describes interfaces on the AP4050DN-HD.
Table 1-1 Interface description
No.
1
2
3
4
5
6

1.2 Indicator Description

The AP4050DN-HD provides only a single indicator, as shown in Figure 1-2.
Issue 01 (2016-04-15)
Name
Default
CONSOLE
GE1/PoE_OU
T
GE0/PoE_IN
DC 12V
Security slot
Connects to a power supply. The AP supports the following power supply modes:PoE power supply

and DC power supply.
When the AP uses the DC power supply, use a power adapter for power supply; otherwise, the AP

may be damaged.
Indicator colors may vary slightly at different temperature.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Reset button: restores factory settings and restarts the
device if you hold down the button more than 3 seconds.
Connects to a maintenance terminal for AP configuration
and management.
10/100/1000M port: connects to the wired Ethernet and
supports PoE output.
10/100/1000M port: connects to the wired Ethernet. The
port can connect to a PoE power supply to provide power
for the AP.
DC power socket: connects a 12 V power adapter to the
AP.
Connects to a security lock.
1 Product Overview
2