Whirlpool RF4700XE Use And Care Manual page 38

CARING FOR YOUR RANGE
Removing the right oven door
For normal use of your oven, you do not
need to remove the door. However, if you
have to remove the door follow the instruc-
tions in this section.
The oven door is heavy. Use both hands
to remove and replace the door. Do not lift
and carry the door by the handle. To remove
and replace the door you may need help.
To remove the door:
1. Open the door all the way.
2. Pull up the lock located below each
hinge and push it onto the hook part of
the hinge. You may have to push down
slightly on the door to pull the locks fully
over the hooks.
3. Grasp the door by the sides, then pull
the bottom of the door up and toward
you to disconnect the hinges.
4. Keep pulling the bottom of the door
toward you while moving the top of the
door toward the range to completely
disconnect the hinges.
To replace the door:
1. Grasp the door by the sides. Set hinges
into the hinge slots.
2. Keep pushing the bottom of the door
away from you. While pushing, move the
top of the door away from the range to
correctly position the hinges.
3. Push the lock off of the hook part of the
hinge. You may have to push down on
the door to release the locks.
NOTE: Make sure the hinges are
correctly positioned before unlocking
them.
4. Close the door.
38
Hinge
Lock in disengaged
position
Hinge slot
(door removed
from range)
Hinge
Lock engaged for
door removal