Whirlpool RF4700XE Use And Care Manual page 37

2. Line up openings in the reflector bowl
and notches in the trim ring with the coil
element receptacle.
3. Hold the coil element as level as possible
with the terminals just started into the
receptacle. Push the coil element
terminals into the receptacle.
NOTE: Reflector bowls reflect heat back to
the cookware on the coil elements. They
also help catch spills. When they are kept
clean, they reflect heat better and look
newer longer.
If a trim ring gets discolored, some of your
cookware may not be flat enough, or some
may be too large for the coil element. In
either case, some of the heat that is meant
to go into or around cookware goes down
and heats the trim ring. This extra heat can
discolor it.
Lift-up cooktop
1. Lift front of cooktop at the center and
swing the support rod up.
2. Carefully lower the cooktop onto the
support rod.
NOTE: Do not drop the cooktop.
Damage could result to the porcelain
and the cooktop frame.
3. Wipe with warm, soapy water. Use
a soapy steel-wool pad on heavily
soiled areas.
4. To lower the cooktop, lift cooktop
while lowering the support rod back to
its resting position. Lower the cooktop
into place.
CARING FOR YOUR RANGE
37 37