Ip Ospf Message-Digest-Key - Avaya G250 Reference

CLI Commands

ip ospf message-digest-key

Use the ip ospf message-digest-key command to specify the message-digest key for the
interface. This command enables OSPF MD5 authentication. Use the no form of the command
to remove an old MD5 key.
Syntax
ip ospf message-digest-key key_id algorithm key
no ip ospf message-digest-key key_id
Parameters
Parameter
key_id
algorithm
key
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3), Loopback (L2-L3,
L3), Tunnel (L3, L2-L3)
Example
To specify the message-digest key to be 3 with password mypwd:
G350-001(if:FastEthernet 10/2)# ip ospf message-digest-key 3 md5 mypwd
Related commands
ip ospf authentication,
hello-interval,
show ip ospf, show ip ospf
protocols
262 Avaya G250 and Avaya G350 CLI Reference
Description
The OSPF key ID
The OSPF password
ip ospf authentication-key,
ip ospf network point-to-multipoint,
database,
ip ospf cost,
ip ospf priority,
show ip ospf interface,
Possible Default
Values Value
1-255 10
md5
ip ospf dead-interval,
ip ospf router-id, router
show ip ospf neighbor,
ip ospf
ospf,
show ip