38
Smart Fan Control (Disabled)
This item enables or disables the control of the system fan speed by adjusting the fan
parameter.
Press <Esc> to return to the Hardware Monitor setup page.
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan
speed,...etc.
•
Vcore
•
NB Vcore
•
VDIMM
•
CPU FAN Speed
•
System Fan Speed
•
CPU Temperature
•
System Temperature
Press <Esc> to return to the main menu setting page.
Load Optimal Defaults
This option opens a dialog box that lets you install stability-oriented defaults for
all appropriate items in the Setup Utility. Select <OK> and then press <Enter>
to install the defaults. Select <Cancel> and then press <Enter> to not install the
defaults.
Save Changes and Exit
Highlight this item and press <Enter> to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
select [OK] to save and exit, or select [Cancel] to return to the main menu.
Discard Changes and Exit
Highlight this item and press <Enter> to discard any changes that you have made in
the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog
box appears, select [OK] to discard changes and exit, or select [Cancel] to return to
the main menu.
If you have made settings that you do not want to save, use the "Discard
Changes and Exit" item and select [OK] to discard any changes you have
made.
This concludes Chapter 3. Refer to the next chapter for information on the software
supplied with the motherboard.
Using BIOS