Standard Cmos Setup - ECS 761GXM-M2 Manual

30

Standard CMOS Setup

This option displays basic information about your system.
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
System Time
System Date
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
Fourth IDE Master
Fourth IDE Slave
Floppy A
Floppy B
System Date & System Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
IDE Devices
Your computer has two IDE channel which can be installed with two or four devices
(Master and Slave). In addition, this motherboard supports two SATA channels and
each channel allows one SATA device to be installed. Use these items to configure
each device on the IDE channel.
Floppy A/B (1.44 MB 3
These items set up size and capacity of the floppy diskette drive(s) installed in the
system.
Press <Esc> to return to the Standard CMOS Setup page.
Standard CMOS Setup
00 : 47 : 28
Mon 05/12/2006
Hard Disk
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
1.44 MB 3
Disabled
: Move Enter : Select
+/-/: Value
F1: General Help
F9: Optimized Defaults
1
/ /Disabled)
2
Using BIOS
Help Item
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
1
/
2
F10: Save ESC: Exit