Load Optimal Defaults; Supervisor Password - ECS P17G/1333 Series User Manual

Motherboard User's Guide
CPU Frequency Setting
This item allows you to set CPU frequency. And the CPU frequency will be 333MHz
when the FSB reaches 1333MHz.
DRAM Frequency (Auto)
This item shows the frequency of the DRAM in your computer. When it is FSB
1333MHz CPU, the select options will be Auto, 533MHz, and 667MHz, and when it
is not FSB 1333MHz CPU, the select options will be Auto, 400MHz, 533MHz and
667MHz.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Disabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Frequency (Auto)
Use this option to adjust CPU frequency. And this item shows only when the FSB
reaches 1333 MHz.
Press <Esc> to return to the main menu setting page.

Load Optimal Defaults

This option opens a dialog box that lets you install optimized defaults for all appropri-
ate items in the Setup Utility. Press <Y> and then <Enter> to install the defaults. Press
<N> and then <Enter> to not install the defaults. The optimized defaults place de-
mands on the system that may be greater than the performance level of the compo-
nents, such as the CPU and the memory. You can cause fatal errors or instability if you
install the optimized defaults when your hardware does not support them. If you only
want to install setup defaults for a specific option, select and display that option, and
then press <F7>.

Supervisor Password

This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Security Settings
Supervisor Password : Not Installed
Change Supervisor Password
(266MHz)
Supervisor Password
: Move Enter : Select
F1: General Help
F9: Optimized Defaults
Install or Change the
Press Enter
password.
F10: Save and Exit
+/-/: Value
ESC: Exit
32
Help item