Load Optimal Defaults; Save Changes And Exit; Discard Changes And Exit - ECS Elitegroup P4M8OOPRO User Manual

38
System Hardware Monitor
These items display the monitoring of the overall inboard hardware health events, such as
system&CPU temperature, CPU & DIMM voltage, CPU & system fan speed,...etc.
Shutdown Temperature (Disabled)
This item enables users to set the maximum temperature the system can reach before
powering down.
SMART Fan Control (Disabled)
This item enables users to enable or disable smart fan function.
Press <Esc> to return to the main menu setting page.

Load Optimal Defaults

This option opens a dialog box that lets you install stability-oriendted defaults for all
appropriate items in the Setup Utility. Select [OK] and then press <Enter> to install the
defaults. Select [Cancel] and then press <Enter> to not install the defaults.

Save Changes and Exit

Highlight this item and press <Enter> to save the changes that you have made in the Setup
Utility and exit the Setup Utility. When the Save and Exit dialog box appears, select [OK]
to save and exit, or select [Cancel] to return to the main menu.

Discard Changes and Exit

Highlight this item and press <Enter> to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box appears,
select [OK] to discard changes and exit, or select [Cancel] to return to the main menu.
If you have made settings that you do not want to save, use the "Discard
Changes and Exit" item and select [OK] to discard any changes you have
made.
Using BIOS