Load Best Performance Settings; Load Optimal Defaults; Save Changes And Exit; Discard Changes And Exit - ECS 915GV-M10 Manual

36

Load Best Performance Settings

If you select this item and press <Enter> a dialog box appears. If you select [OK], and then
press <Enter>, the Setup Utility loads a set of best performance default values. These
default values are quite demanding and your system might malfunction or be unstable
if you are using slower memory chips or other low-performance components.

Load Optimal Defaults

If you select this item and press <Enter> a dialog box appears. If you select [OK], and then
press <Enter>, the Setup Utility loads a set of fail-safe default values. These default values
are not very demanding and they should allow your system to function with most kinds of
hardware and memory chips.

Save Changes and Exit

Highlight this item and press <Enter> to save the changes that you have made in the Setup
Utility configuration. When the Save Changes and Exit dialog box appears, select [OK] to
save and exit, or [Cancel] to return to the main menu.

Discard Changes and Exit

Highlight this item and press <Enter> to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Discard Changes and Exit dialog box
appears, select [OK] to discard changes and exit, or [Cancel] to return to the main menu.
If you have made settings that you do not want to save, use the "Discard
Changes and Exit" item and press <OK> to discard any changes you have
made.
Using BIOS